A4007TS Rotary Stage
These economically priced turn tables differ from gear driven Rotary Tables in that these turntables can be spun quickly by hand.
The A4007TS differs from gear driven Rotary Tables in that these turntables can be spun quickly by hand. Tightening the the clamping knob allows fine motion control.
Anywhere within the 360°, there can be a 12° range of fine (knob controlled) adjustment. The A4007TS is also priced more economically than other rotary stages.
Tightening of the the the clamping knob allows fine motion control and anywhere within the 360°, there can be a 12° range of fine (knob controlled) adjustment.
How the Velmex A4007TS Rotary Table works
Unlike other Rotary Tables, the A4007TS does not use a worm and gear design. Instead, they use a spring-loaded tangent screw drive for fine adjustments. With the Lock Knob released, the turntable is freely rotated by hand to the approximate target position.
Turning the Adjust Knob engages a tangent screw driven against a spring-loaded yoke, allowing you to fine tune your position to 0.1 degree. The spring will resist up to 14 oz-in of rotational torque.
Typical applications include mounting and rotation of test specimens, cameras, transducers, sensors, mirrors and other components. These tables cannot be motor-driven, or vertically mounted except for light (< 1 lb.) loads, and are not recommended for strong pulling (tensile) loads.
The Velmex A4007TS Turntable is only manually-operated and cannot be motorized. For motorized rotating tables check out our Rotary Tables.
(Note: Center is not a through hole.)
Specifications
Factors such as size of the motor, size of the payload, travel distance, mounting direction/plane, etc. effect the actual capability of any assembly. Please contact Velmex Application Engineers to configure a system that will meet your exact requirements.
| Travel | Diameter | Length with Knobs | Weight | Height | |||||
| Lock / Release Knob | Fine Adjust Knob | Inches | cm | Inches | cm | lbs. | kg. | Inches | cm |
| 0-360°+ | 12° max | 4.13" | 10.5 | 6" | 15.2 | 1.75 | 0.8 | 1.3" | 3.3 |
| Horizontal Central Load | Cantilevered Load | Vertical Central Load | |||
| lbs. | kg. | lbs. | kg. | lbs. | kg. |
| 200 lbs. | 90.7 | Not recommended | Not recommended | < 1 lb.* | .45 |
*Not recommended for vertical loads greater than 1 lb.
Directly mounting the Turntable Base to a linear UniSlide
| A4007TS | Thread | Ctr to Ctr | Accepts |
| A | 10-32 | 3.250" | All A4000 Adapters |
| B | 8-32 | 2.062 | All A2500 Adapters |
| Clearance | Ctr to Ctr | Mounts On | |
| C | #10 CPHD | 2.688" | All A40/60 Sliders |
| D | N/A | N/A | – |
Applications and Examples
The example displayed may be a custom configuration, designed to the customer’s specifications; and not offered as a standard product. Custom configurations could contain custom, externally-fabricated components.
Pictured in our gallery are examples of configurations for manual Turntables, along with configurations that also include other Velmex products. Product and accessory offering is subject to change and availability.
This is a combination Rotary Table mounted to a Velmex UniSlide A40 Linear Stage.
This is an example of a Rotary Table mounted on an XY Stage
This is an example of a Unislide AXY Table with a Rotary Stage mounted.
MSPP-7
MSPP-7 is used to combine the A4007TS Rotary Stage to BiSlide® Linear Stages
XS001-28
This adapter is used to mount an A4007TS Rotary Stage to XSlide linear stages.
The A4007TS Rotary Stage can be mounted to UniSlides using the A2400 or A4000 adapter plates and mounts directly on UniSlide stages with a S4, S6 or S8 slider / carriage.
Optional Finishes
Many Velmex Products come standard with a brushed aluminum finish. Optional finishes including Black Anodizing are available.
Downloads
The majority of CAD drawings found in our Technical Library are Step (.stp) files. You will also see .dxf, .dwg, .sat and .pdf files. For .STP files, you may need to right click on the download button and save the “target” or “link”. If you require a different format or cannot located the drawing you require, please contact us.
Frequently Asked Questions
The part number can be found on the side of the Turntable.
The bearings contained in the turntables do not require lubrication.
Yes, Turntables can be and are frequently combined with other slides, particularly UniSlides®, to achieve a particular motion or positioning. Which stage used in conjunction with the Turntable will determine which adapter plate or slider might be required.
No, the Turntable is not open in the center. The center is where the top and bottom are secured together.
For Velmex Turntable troubleshooting guides visit the Troubleshooting Page and select your product from the dropdown.
| Motion | Rotary |
|---|
You may also like…
A48 Series Manual Rotary Stages
Manually operated 5" Ball Bearing Rotary Stage for loads up to 200 lbs.
B48 Series Motorized Rotary Stages
The B48 Series Motorized Rotary Stages use a rugged worm and gear drive design with a central rotating ball bearing to turn the payload. These rotary tables can handle 200 lbs. (90 kg.) horizontally and 25 lbs. (11.3 kg.) vertically.
B5990TS Motorized Rotary Stage
Compact 1.65" Motorized Rotary Stage for loads up to 50 lbs.
A59 Series Rotary Stage
The smaller A5900 can handle 50 lbs. (22.6 kg.) horizontally and 5 lbs. (2.3 kg.) vertically. The series features a hollow spindle or clear aperture in the center and comes in a standard black anodized finish.
