Motorized BiSlide® Parallel-Coupled Belt-Driven Linear Stage
Parallel-Coupled Belt-Driven BiSlide® Assemblies are the ideal solution for applications with large loads or long spans. These are able to carry loads up to 600 lbs. at a distance of up to 228″
Choose the Parallel Coupled Belt-Driven BiSlide® Assembly for Large and Long Traverses
If your application calls for large loads or the ability to traverse long distances in two or three axes, the Parallel Coupled Belt-Driven BiSlide® Assembly is what you need. This assembly can handle loads up to 200 lbs. (90.7 kg) and is available in many standard lengths up to 228 inches (579 cm).
Using two identical Belt-Driven BiSlide® positioning stages and a timing belt drive for synchronous operation. While Belt-Driven BiSlide® Assemblies typically handle lighter loads and faster speeds, the advantages of both systems can be incorporated into one. By doing so you increase the size of the payload the Belt-Drive system can handle while at the same time, increasing the speed and the traverse of the Parallel-Coupled BiSlide®. Belt-driven systems feature a drive shaft coupling in place of the timing belt to synchronized the operation of the parallel BiSlide®.
Constructed with hard-coat anodized, aluminum dovetail ways and smooth motion PTFE linear bearings; BiSlide® Assemblies deliver higher rigidity for longer life and more precise movement. Longer traverses include specially-designed separators mounted perpendicular to the base to keep the system in parallel and add extra stability. The entire system is comprised of our proven BiSlide® I-beam design and has all the same features of renown Velmex BiSlide® stages.
Use our inexpensive MC-2 Cleats to mount your Parallel Coupled BiSlide® Assembly to nearly any flat surface. For a free-standing assembly, BiSlide® can be cleated to the T-slot plate or base structural profiles.
Parallel systems are usually shipped unassembled to eliminate crating charges and trucking costs. These kits include detailed assembly instructions, all fasteners, hardware, and come complete with a timing belt tensioner. They can be shipped fully assembled if required.
* Motors sold separately. NEMA 23 units sold with .250″ motor mounting coupling. NEMA 34 units sold with .375″ motor mounting coupling.
Need increased resolution?
Gear reduction motors are available that will increase the resolution on a Belt-Driven BiSlide® Assembly, however, that will reduce the travel speed.
Features
Maximum load capacity – 200 lbs. (90.7 kg.)
Maximum Travel Distance – 228″ (579 cm)
Specifications
Factors such as size of the motor, size of the payload, travel distance, mounting direction/plane, etc. effect the actual capability of any assembly. Please contact Velmex Application Engineers to configure a system that will meet your exact requirements.
| Standard | Metric | |
| Travel Distance | up to 80" | up to 203.2 cm |
| Base Length | ||
| Slider Length | 5" | 12.7 cm |
| Weight | ||
| Height | ||
| Width |
‡Standard travel distances of 8″ to 80″ center to center measurement. Most Parallel-coupled BiSlide® Assemblies are custom; other specifications will depend on design and the components of the specific system. Contact a Velmex Application Engineer for additional specifications.
BiSlide® Parallel-Coupled Load Calculations
Note:
Because of the interlocking nature of the BiSlide® carriage and the dovetail ways, the maximum recommended load centered (normal) or under thrust would be comparable whether the slide was upright (Normal – LN), Inverted (LI) or set on the Edge (LE).
To calculate equivalent center load for a cantilevered load: Lc = (Dx L/2) + L
| Dynamic Load | Static Load | Momentary Load | ||||
| Load Capacity | lbs. | kg. | lbs. | kg. | lbs. | kg. |
| Maximum Centered | 200 lbs. | 90.7 kg | 300 lbs. | 136.1 kg | 300 lbs. | 136.1 kg |
| Thrust | 100 lbs. | 45.4 kg. | 100 lbs. | 45.4 kg | 200 lbs. | 90.7 kg. |
| Cantilevered | 500 lbs.-in. | 56.5 n-m |
Deflection: a = 0.000011 degrees / in-lb (F x d = in-lbs)
Coefficient of friction
Coefficient range
Repeatability
Straight line accuracy
Screw lead accuracy
Operating temperature
.09 typical
0.04 (Heavy Load Dynamic) to 0.15-0.3 (Lubricated heavy Load Static>1 hour)
0.00015″ (4 microns) typical
0.003″ (0.076 mm) over entire travel distance. Higher accuracy 0.0015″ (0.038mm) available
0.003″/10″ (0.076 mm/25 cm) 0.0015″/10″ available. Consult factory.
0 to 180° F (-18 to 82° C)
Information on stage composition, tolerances, wear and design for specialty applications.
Definitions and parameters that effect the various load ratings.
Options/Accessories for Motorized BiSlide®Assemblies
Several options can be added to BiSlide® Assemblies to make them more versatile and configurable with other Velmex products.
BiSlide® Limits
Limit switches mounted in the track on the side rib of the assembly to prevent over-travel.
NEMA 23 VML231-3.0-D Motor
NEMA 23 Motor for UniSlide®, XSlide®, BiSlide® and B48 Series Rotary Stages
NEMA 23 VML232-4.0-D Motor
NEMA 23 Motor for UniSlide® BiSlide® and B48 Series Rotary Stages
NEMA 34 VML341-4.0-D Motor
Compatible with UniSlide®, BiSlide®, BiSlide® Parallel Coupled, and BiSlide® Belt Driven Assemblies
VRO™ Encoder Readout
The Velmex VRO™ Encoder Readout is a compact one or two axes digital readout for linear and rotary incremental encoders.
VXC™ Stepper Motor Controller
The new VXC is a plug and play microstepping motor controller / driver with the ability to run up to 4 axes simultaneously. This easy to setup bipolar controller has the ability to be run standalone, or be integrated into a system.
IM001-130-131 Plate
Payload plate to expand the carriage (8″ x 8″ x 0.375″)
IM001-130-132 Plate
Payload plate to expand the carriage (12″ x 12″ x 0.375″)
MSPP-1 Foot Plate
MSPP-1 Foot Plate is used as part of the foot for BiSlide bases and post assemblies.
MSPP-10A Adapter Plate
BiSlide Plate to connect to two carriages in one slide together with flexible mounting holes
MSPP-10B Adapter Plate
Tandem BiSlide® plate to connect to four carriages together for mounting Y axis Tandem on top
MSPP-2
Multipurpose adapter plate (4.6″ x 4.6″ x 0.375″)
MSPP-3 Adapter Plate
MSPP-4 Adapter Plate
Use to mount Rotary Table (A59 or B59 Series) to BiSlide Linear Stages
MSPP-5 Adapter Plate
Use to end mount BiSlide extrusion.
MSPP-6
Adapter plate to end mount BiSlide Linear Stage to an optical bench
XS001-20 Adapter Plate
Connects an XSlide™ Linear Stage to a BiSlide Linear Stage.
MB-1 Mounting Bolts
BiSlide® Bolt - 1/4-20 x 3/4" Socket Cap Screw (10 Pack)
MB-1-SS Mounting Bolts
BiSlide® Bolt - 1/4-20 x 3/4" Stainless Steel Socket Cap Screw
MB-2 Mounting Bolts
BiSlide® Bolt - 1/4-20 x 1/2" Buttonhead
MC-1 BiSlide® Cleat
Standard 1 hole cleat. Mounts the BiSlide to a frame / base / surface. Can be used to mount to other BiSlides in an XY, XZ or XYZ configuration.
MC-2 BiSlide® Cleat
Standard 2 hole cleat. Mounts the BiSlide to a frame / base / surface. Can be used to mount to other BiSlides in an XY, XZ or XYZ configuration.
MC-3 BiSlide® Cleat
2 hole cleat with 2″ center to center for use with optical benches with 1″ or 25 mm centers.
MC-4 BiSlide® Cleat
Sandwich cleats – used to connect two parallel bases.
MTN-1 T-Nuts
Use to create strong, secure attachments on BiSlide Assemblies.
BiSlide® Base Material
The extruded I-beam base is made from a hard alloy aluminum and includes T-slots on each side to easily connect BiSlides to each other or attach the BiSlide to a frame or base structure.
BiSlide® Foot
Acts as an adjustable foot for BiSlide bases and post assemblies. (LFS-1) (Shown with a MSPP-1 foot plate.)
F2 Style BiSlide® Base
These bases have I-Beam top rails running parallel on two sides and are ideal for supporting parallel coupled BiSlide® Assemblies.
F4 Style BiSlide® Base
F4 Style bases have I-Beam top rails on all four sides for maximum support of heavy loads.
Support Rails
BiSlide® Support Rails are attached to the frame or a surface to provide added support to the system, particularly multi-axis configurations.
T-Slot Plate
T-Slot Plate creates a heavy-duty support structure for building BiSlide mounting and framing structures or configuring multiple coordinates.
GST-1 BiSlide® Gusset
A compact, standard vertical support gusset that increases stiffness and stability for vertically mounted BiSlide® systems in free-standing, side-mounted, or horizontal configurations.
GST-2 BiSlide® Gusset
A larger, heavy-duty vertical support gusset designed to provide increased rigidity and load support for taller or higher-moment BiSlide® assemblies in free-standing, side-mounted, or horizontal configurations.
GST-U BiSlide® Gusset
A fully configurable, inline-mounted vertical support gusset that delivers maximum stiffness for custom-length, high-load, and tall BiSlide® positioning systems.
Post Assemblies
Attach at right angles to the BiSlide® Assembly to provide a convenient method to connect rotary tables or other accessories at a right angle, a distance from the carriage surface. Supports an adapter plate either vertically or horizontally.
BiSlide® Way Covers
Way Covers protect the slider and dovetail base from dust, dirt and grit that could hamper the efficient operation of the slide, thereby extending the life of the slide.
BiSlide® Additional Carriages
Additional carriages (sliders) can be added to all models of BiSlide® Assemblies to increase the carrying capacity of the slide.
BiSlide® Limits
Limit switches mounted in the track on the side rib of the assembly to prevent over-travel.
BiSlide® Revolution Counter (-12, -13, -14, -15)
The mechanical counter provides a convenient lead screw revolution count. This aids in determining position and providing a reference number for the location of the carriage / slider.
BiSlide® Scale on Base
The BiSlide® Scale on Base option includes a precision engraved English or Metric scale on the assembly base.
BiSlide® Two Independent Carriages
A single BiSlide® assembly containing two independently controlled sliders and lead screws.
Encoders
Manual BiSlide® Left-Right Screw Motion
When the knob is turned, two objects sharing a common axis of movement move toward or away from each other.
Motorized / Manual Operation
Right Angle Gearbox
Allows the control knob or wheel to be offset perpendicular to the BiSlide ways / centerline.
VRO™ Encoder Readout
The Velmex VRO™ Encoder Readout is a compact one or two axes digital readout for linear and rotary incremental encoders.
Velmex offers a multitude of options and accessories for all its products. Usually an option or an accessory will address your requirements. When it doesn’t, we can make custom modifications, including:
• Additional holes or slots. (A drawing is required.)
• Intermediate plates to mount your payload
• Special or in between lengths of the dovetail base
• Lead screw shaft extensions
• Choice of drive nut materials, including brass and Vespel
We can also offer customized configurations to address special environmental and vacuum applications.
Applications and Examples
Note: the example displayed may be a custom configuration, designed to the customer’s specifications; and not offered as a standard product. Custom configurations could contain custom, externally-fabricated components.
Downloads
The majority of CAD drawings found in our Technical Library are Step (.stp) files. You will also see .dxf, .dwg, .sat and .pdf files. For .STP files, you may need to right click on the download button and save the “target” or “link”. If you require a different format or cannot located the drawing you require, please contact us.
| Title | Summary | File Type | Link | hf:file_type |
|---|---|---|---|---|
| BiSlide Belt Drive Parallel Coupled Assy.pdf | Instructions – Assembly of the Parallel-Coupled Belt-Drive (motor-driven) BiSlide System | |||
| BiSlide Beltdrive Parallel 120in ctr to ctr.sat | Motorized, Parallel-Coupled, Belt-Driven BiSlide with ±100″ Travel, set 120″ center to center, with 2 supports to the frame | sat | sat | |
| BiSlide Beltdrive Parallel 120in ctr to ctr.stp | Motorized, Parallel-Coupled, Belt-Driven BiSlide with ±100″ Travel, set 120″ center to center, with 2 supports to the frame | stp | stp | |
| BiSlide Dimensional Drawing | 2D Dimensional Drawings | |||
| Parallel-Coupled BiSlide® Dimensional Drawings | Dimensional drawings for the Parallel-Coupled BiSlide® |
| Motion | Linear |
|---|---|
| Maximum Travel | 80" (203.2 cm) |
| Minimum Travel | 5" (12.7 cm) |
