UniSlide® A40 Series – Rapid Advance with Limited Fine Adjust
Quick slider repositioning with 1/2″ of precise fine-pitch adjustment.
The A40 Series UniSlide® Rapid Advance with Limited Fine Adjust is designed for applications requiring frequent or long-distance slider repositioning. The Rapid Advance feature allows the slider to be quickly moved by uncoupling the drive system, saving time on long-base setups or when frequent adjustments are needed. The limited fine adjust provides 1/2″ of controlled fine-pitch movement using a clamping-like drive for precise positioning.
Features
Quickly repositioning the slider by uncoupling the drive system
1/2″ fine pitch adjustment using clamping-like drive for precision control
Rapid Advance feature not recommended for vertical (Z-axis) mounting
Low-profile, rigid aluminum dovetail base and carriage
Ideal for laboratory, inspection, and precision alignment applications
Travel distances from 2″ to 38″
Supports up to 100 lbs horizontal load
Specifications
Factors such as size of the motor, size of the payload, travel distance, mounting direction/plane, etc. effect the actual capability of any assembly. Please contact Velmex Application Engineers to configure a system that will meet your exact requirements.
Downloads
The majority of CAD drawings found in our Technical Library are Step (.stp) files. You will also see .dxf, .dwg, .sat and .pdf files. For .STP files, you may need to right click on the download button and save the “target” or “link”. If you require a different format or cannot located the drawing you require, please contact us.
UniSlide® A40 Dimensions
| Standard | Metric | |
| Travel Distance | 2" - 38" | 5.08 – 96.52 cm |
| Base Length | 6" - 42" | 15.24 – 106.68 cm |
| Slider Length | 4" | 10.16 cm |
| Weight | 2.4 – 11 lbs. | 1.1 – 5 kg. |
| Height** | 1.06" | 2.69 cm |
| Width | 4" | 10.16 cm |
‡ Standard travel distances available are in 3″ increments.
UniSlide® A40 Load Calculations
| Load Capacity | lbs. | kg. |
| Maximum Horizontal Load | 100 lbs. | 45.5 kg. |
| Horizontal Central Load | 100 lbs. | 45.5 kg. |
| Cantilevered Load | 130 lb-in | 14.7 N-m |
| Vertical Central | 50 lbs. | 22.7 kg. |
| Load Normal (LN)* | 40 lbs. | 18.14 kg. |
| Load Thrust (LT)† | 20 lbs. | 9.07 kg. |
| Cantilever Side (LCS)* | 32 lb-in | 3.62 N-m |
| Cantilever Inline (LCI)* | 64 lb-in | 7.23 N-m |
* Normal Operating Loads are less than the maximum.
† 5 lbs. max for Rapid Advance models.
Lead Screw Specifications
| Repeatability | 0.00015″ (4 microns) typical |
| Straight line accuracy | 0.003″ (0.076 mm) over entire travel distance. Higher accuracy 0.0015″ (0.038mm) available |
| Screw lead accuracy | 0.003″/10″ (0.076 mm/25 cm) 0.0015″/10″ available. Consult factory. |
English Thread Lead Screws
| Pitch | Backlash Typical | ||||||||
| Turns per inch | Advance per revolution | English | Metric | Degrees | Fine Adjust | Fine Adjust with Scale and Vernier - Limited Travel | Fine Adjust with Micrometer - Limited Travel | Fine Adjust with Scale and Vernier | Lead Screw Diameter |
| 20 | 0.05" | 0.00025" | 0.006 mm | 1/200 rev or 1.8° | D (Limited Travel) / H20 (Full Travel) | DE | GE | HE | 3/8" |
Metric Thread Lead Screws
| Pitch | Backlash Typical | ||||||||
| Turns per cm | Advance per revolution | English | Metric | Degrees | Fine Adjust - Full Travel | Fine Adjust with Scale and Vernier - Limited Travel | Fine Adjust with Micrometer - Limited Travel | Fine Adjust with Scale and Vernier - Full Travel | Lead Screw Diameter |
| 10 | 1 mm | 0.0002" | 0.005 mm | 1/200 rev or 1.8° | H1 | DM | GM | HM | 10 mm |
*Adjustable nut models (A25,A40,A60) can have backlash adjusted to near 0. Manual applications only
Options/Accessories for A40 UniSlide® Assemblies
A4000XY Adapter Plate
To mount an A40 or MA40 Series UniSlide to another A40 or MA40 Series or to an A25 or MA25 Series in XY. (The A40 or MA40 would be the base stage.)
A4000XZ Adapter Plate
Mount an A40 or MA40 Series UniSlide or an A25 or MA25 Series vertically to another A40 or MA40 Series in XZ.
A4001XZ Adapter Bracket
Mount an A40 or MA40 Series UniSlide (6″- 9″) or an A25 or MA25 Series (6″- 9″) vertically to another A40 or MA40 Series in XZ. Can also mount two B4800TS Rotary Tables at right angles.
A6000TX Adapter Plate
A6000XY Adapter Plate
Mount an A60 or MA60 Series UniSlide to another A60 or MA60 Series or to an A40 or MA40 Series in XY.
A6000XZ Adapter Plate
To mount an A60 or MA60 Series UniSlide to another A60 or MA60 Series or to an A40 or MA40 Series in XZ. (The A60 or MA60 would be the base horizontal stage.)
A6001XZ Adapter Bracket
Mount an A60 or MA60 Series UniSlide to another A60 or MA60 Series (up to 12″) or to an A40 or MA40 Series (up to 12″) in XZ.
B4003XZ Adapter Bracket
Mount a vertical A25, MA25, A40, or MA40 Series UniSlide® Assembly (12″–15″ travel) to a horizontal A40 or MA40 Series UniSlide® base stage in an XZ configuration.
B4004XZ Adapter Bracket
To mount an A40 or MA40 Series UniSlide to another A40 or MA40 Series (over 15″) or to an A25 or MA25 Series (over 15″) in XZ. (The A40 or MA40 would be the base horizontal stage.)
B5990TXZ-BK Adapter Plate
Use this bracket to mount two B5990TS Rotary Tables at right angles to each other or to mount a B5990TS to a UniSlide® Linear Stage.
B6003XZ Adapter Bracket
To mount an A60 or MA60 Series UniSlide to another A60 or MA60 Series (12″- 15″) or to an A40 or MA40 Series (12″- 15″) in XZ. (The A60 or MA60 would be the base horizontal stage.)
B6004XZ Adapter Bracket
To mount an A60 or MA60 Series UniSlide to another A60 or MA60 Series (over 15″) or to an A40 or MA40 Series (over 15″) in XZ. (The A60 or MA60 would be the base horizontal stage.)
UniSlide® Slider Lock
This lock is mounted at the mid-point on the base and is tightened to prevent slider movement.
UniSlide® Thumbscrew-on-Lead-Screw Lock
An easy method to affix the slider utilizing a simple thumbscrew on the lead screw at the end bearing block of each axis.
UniSlide® Traveling Slider Lock (-TSL)
This lock attaches to the slider to lock the carriage in place.
A25 / A40 Series Right Angle Gearbox
Ideal for tight spaces or applications where access to the end of the stage is limited.
A40 Alternative Knobs
A variety of knob styles can be substituted for the standard knob on any UniSlide® Assembly.
B49 Platform Shelf
Platform shelf from UniSlide® A40 and MA40 Elevating Tables that can be used on vertical UniSlide® Assemblies.
Left-Right Screw Motion
This configuration enables two carriages to travel along a shared axis using a single lead screw while moving towards or away from each other.
Optional Finishes
Many Velmex Products come standard with a brushed aluminum finish. Optional finishes including Black Anodizing are available.
Slider Lengths
All UniSlide® Assemblies are available with a variety of carriage (slider) lengths to suit different application needs.
Two Independent Carriages
Separate and precise positioning along the same linear axis using two lead screws.
UniSlide® Way Covers
Way Covers protect the slider and dovetail base from dust, dirt and grit that could hamper the efficient operation of the slide, thereby extending the life of the slide.
UniSlide® Revolution Counter
The mechanical counter provides a convenient lead screw revolution count. This aids in determining position and providing a reference number for the location of the carriage / slider.
UniSlide® Vacuum Modifications
Stages for use in vacuum environments can be customized with special materials, coatings, and seals to ensure compatibility with low-pressure conditions and minimize outgassing
Velmex offers a multitude of options and accessories for all its products. Usually an option or an accessory will address your requirements. When it doesn’t, we can make custom modifications, including:
• Additional holes or slots. (A drawing is required.)
• Intermediate plates to mount your payload
• Special or in between lengths of the dovetail base
• Lead screw shaft extensions
• Choice of drive nut materials, including brass and Vespel
We can also offer customized configurations to address special environmental and vacuum applications.
Applications and Examples
Note: the example displayed may be a custom configuration, designed to the customer’s specifications; and not offered as a standard product. Custom configurations could contain custom, externally-fabricated components.
Downloads
The majority of CAD drawings found in our Technical Library are Step (.stp) files. You will also see .dxf, .dwg, .sat and .pdf files. For .STP files, you may need to right click on the download button and save the “target” or “link”. If you require a different format or cannot located the drawing you require, please contact us.
| Title | Summary | File Type | Link | hf:file_type |
|---|---|---|---|---|
| A4006D-S4.stp | Rapid Advance – limited adj., 2″ Travel | stp | stp | |
| A4009D-S4.stp | Rapid Advance – limited adj., 5″ Travel | stp | stp | |
| A4012D-S4.stp | Rapid Advance – limited adj., 8″ Travel | stp | stp | |
| A4015D-S4.stp | Rapid Advance – limited adj., 11″ Travel | stp | stp | |
| Manual UniSlide® Dimensional Drawings | Dimensional drawings for the 5 Series of Manually Operated UniSlide® Linear Stages | |||
| UniSlide Manual Spec Overview | Overview of Manual UniSlide® Assemblies | |||
| UniSlide® Users Manual | Operating and Service Manual for UniSlide® Stages |
Knowledge Base
| Motion | Linear |
|---|---|
| Maximum Travel | 80" (203.2 cm) |
| Minimum Travel | 5" (12.7 cm) |
