UniSlide® A60 Series – Graduated Knob Models
Precise Positioning with Combined Linear Scale and Knob Readout
The A60 Series UniSlide® stage has a body width of 6 inches, slider length of 6 inches carrying a 240 lbs. horizontal load. The A60 Series has a maximum travel of up to 42″ with the 6″ slider/carriage. The A60 is very versatile for a variety of applications.
The A60 Series Graduated Knob Models allow for accurate manual positioning of the slider while providing precise measurement of the payload’s location. Position is determined by combining readings from the linear scale on the base and the engraved knob or drum dial on the slider, achieving measurement resolution of 0.001″ (0.01 mm).
Features
Position measured using combined linear scale and engraved knob/drum dial
High-resolution readout: 0.001″ (0.01 mm)
Manual slider movement with smooth, guided motion
6″ body width and 6″ slider/carriage for stable operation
Durable aluminum-alloy construction with rigid dovetail base
Ideal for precise alignment, inspection, and laboratory applications
Low-profile, compact design for versatile mounting
Specifications
Factors such as size of the motor, size of the payload, travel distance, mounting direction/plane, etc. effect the actual capability of any assembly. Please contact Velmex Application Engineers to configure a system that will meet your exact requirements.
| Operating temperature | 0 to 180° F (-18 to 82° C) |
Properties of Velmex Stages - Information on stage composition, tolerances, wear and design for specialty applications.
Load Parameters - Definitions and parameters that effect the various load ratings.
UniSlide® A60 Dimensions
| Standard | Metric | |
| Travel Distance | 3" - 42" | 7.62 – 106.68 cm |
| Base Length | 9" - 48" | 22.86 – 121.92 cm |
| Slider Length | 6" | 15.24 cm |
| Weight | 8 – 40.5 lbs. | 3.6 – 18.37 kg. |
| Height** | 1.75" | 4.45 cm |
| Width | 6" | 15.24 cm |
‡ Standard travel distances available are in 3″ increments
UniSlide® A60 Load Calculations
| Load Capacity | lbs. | kg. |
| Maximum Horizontal Load | 240 lbs. | 109 kg. |
| Horizontal Central Load | 240 lbs. | 109 kg. |
| Cantilevered Load | 320 lb-in | 36.2 N-m |
| Vertical Central | 100 lbs. | 45 kg. |
| Load Normal (LN)* | 80 lbs. | 36.29 kg. |
| Load Thrust (LT)† | 40† lbs. | 18.14† kg. |
| Cantilever Side (LCS)* | 80 lb-in | 9.04 N-m |
| Cantilever Inline (LCI)* | 160 lb-in | 18.07 N-m |
* Normal Operating Loads are less than the maximum.
† 5 lbs. max for Rapid Advance models.
Lead Screw Specifications
| Repeatability | 0.00015″ (4 microns) typical |
| Straight line accuracy | 0.003″ (0.076 mm) over entire travel distance. Higher accuracy 0.0015″ (0.038mm) available |
| Screw lead accuracy | 0.003″/10″ (0.076 mm/25 cm) 0.0015″/10″ available. Consult factory. |
English Thread Lead Screws
| Pitch | Backlash Typical | UniSlide™ Code | |||||||
| Turns per inch | Advance per revolution | English | Metric | Degrees | Standard Accuracy | With Scale and Vernier - Standard Accuracy | With Graduated Knob - Precision Accuracy | Division on Graduated Knob | Lead Screw Diameter |
| 40 | 0.025" | 0.00013" | 0.003 mm | 1/200 rev or 1.8° | C | CE | P40 | 25 | 1/2" |
| 20 | 0.05" | 0.00025" | 0.006 mm | 1/200 rev or 1.8° | B | BE | P20 | 50 | 1/2" |
| 10 | 0.1" | 0.0005" | 0.013 mm | 1/200 rev or 1.8° | W1 | W1E | P10 | 100 | 1/2" |
| 5 | 0.2" | 0.001" | 0.025 mm | 1/200 rev or 1.8° | W2 | W2E | P5 | 200 | 1/2" |
| 2.5 | 0.4" | 0.002" | 0.051 mm | 1/200 rev or 1.8° | W4 | - | - | - | 1/2" |
Metric Thread Lead Screws
| Pitch | Backlash Typical | UniSlide® Code | |||||||
| Turns per cm | Advance per revolution | English | Metric | Degrees | Standard Accuracy | With Scale and Vernier - Standard Accuracy | With Graduated Knob - Precision Accuracy | Division on Graduated Knob | Lead Screw Diameter |
| 10 | 1 mm | 0.0002" | 0.005 mm | 1/200 rev or 1.8° | K1 | K1M | Q1 | 100 | 14 mm |
| 5 | 2 mm | 0.00039" | 0.01 mm | 1/200 rev or 1.8° | K2 | K2M | Q2 | 200 | 14 mm |
*Adjustable nut models (A25,A40,A60) can have backlash adjusted to near 0. Manual applications only
Options/Accessories for A60 UniSlide® Assemblies
A6000TX Adapter Plate
A6000XY Adapter Plate
Mount an A60 or MA60 Series UniSlide to another A60 or MA60 Series or to an A40 or MA40 Series in XY.
A6000XZ Adapter Plate
To mount an A60 or MA60 Series UniSlide to another A60 or MA60 Series or to an A40 or MA40 Series in XZ. (The A60 or MA60 would be the base horizontal stage.)
A6001XZ Adapter Bracket
Mount an A60 or MA60 Series UniSlide to another A60 or MA60 Series (up to 12″) or to an A40 or MA40 Series (up to 12″) in XZ.
B5990TXZ-BK Adapter Plate
Use this bracket to mount two B5990TS Rotary Tables at right angles to each other or to mount a B5990TS to a UniSlide® Linear Stage.
B6003XZ Adapter Bracket
To mount an A60 or MA60 Series UniSlide to another A60 or MA60 Series (12″- 15″) or to an A40 or MA40 Series (12″- 15″) in XZ. (The A60 or MA60 would be the base horizontal stage.)
B6004XZ Adapter Bracket
To mount an A60 or MA60 Series UniSlide to another A60 or MA60 Series (over 15″) or to an A40 or MA40 Series (over 15″) in XZ. (The A60 or MA60 would be the base horizontal stage.)
B9000XY Adapter Plate
To mount a B90 or B90 Series UniSlide to another B90 or B90 Series or to an A60 or MA60 Series in XY. (The B90 or B90 would be the base stage.)
B9000XZ Adapter Plate
To mount a B90 or B90 Series UniSlide to another B90 or B90 Series or to an A60 or MA60 Series in XZ. (The B90 or B90 would be the base horizontal stage.)
B9001XZ Adapter Bracket
To mount a B90 or MB90 Series UniSlide to another B90 or MB90 Series (up to 18″) or to an A60 or MA60 Series (up to 18″) in XZ. (The B90 or MB90 would be the base horizontal stage.)
B9002XZ Adapter Bracket
To mount a B90 or MB90 Series UniSlide to another B90 or MB90 Series (over 24″) or to an A60 or MA60 Series (over 24″) in XZ. (The B90 or MB90 would be the base horizontal stage.)
B9003XZ Adapter Bracket
To mount an A60 or MA60 Series UniSlide to another A60 or MA60 Series (over 15″) or to an A40 or MA40 Series (over 15″) in XZ. (The A60 or MA60 would be the base horizontal stage.)
UniSlide® Slider Lock
This lock is mounted at the mid-point on the base and is tightened to prevent slider movement.
UniSlide® Thumbscrew-on-Lead-Screw Lock
An easy method to affix the slider utilizing a simple thumbscrew on the lead screw at the end bearing block of each axis.
UniSlide® Traveling Slider Lock (-TSL)
This lock attaches to the slider to lock the carriage in place.
A60 / B90 Series Right Angle Gearbox
Ideal for tight spaces or applications where access to the end of the stage is limited. Fits A60 and B90 Series UniSlide® Assemblies.
A60 Alternative Knobs
A variety of knob styles can be substituted for the standard knob on any UniSlide® Assembly.
B69 Platform Shelf
Platform shelf from UniSlide® A60 and MA60 Elevating Tables that can be used on vertical UniSlide® Assemblies.
Optional Finishes
Many Velmex Products come standard with a brushed aluminum finish. Optional finishes including Black Anodizing are available.
Slider Lengths
All UniSlide® Assemblies are available with a variety of carriage (slider) lengths to suit different application needs.
UniSlide® Way Covers
Way Covers protect the slider and dovetail base from dust, dirt and grit that could hamper the efficient operation of the slide, thereby extending the life of the slide.
UniSlide® Revolution Counter
The mechanical counter provides a convenient lead screw revolution count. This aids in determining position and providing a reference number for the location of the carriage / slider.
UniSlide® Vacuum Modifications
Stages for use in vacuum environments can be customized with special materials, coatings, and seals to ensure compatibility with low-pressure conditions and minimize outgassing
Velmex offers a multitude of options and accessories for all its products. Usually an option or an accessory will address your requirements. When it doesn’t, we can make custom modifications, including:
• Additional holes or slots. (A drawing is required.)
• Intermediate plates to mount your payload
• Special or in between lengths of the dovetail base
• Lead screw shaft extensions
• Choice of drive nut materials, including brass and Vespel
We can also offer customized configurations to address special environmental and vacuum applications.
Applications and Examples
Note: the example displayed may be a custom configuration, designed to the customer’s specifications; and not offered as a standard product. Custom configurations could contain custom, externally-fabricated components.
Downloads
The majority of CAD drawings found in our Technical Library are Step (.stp) files. You will also see .dxf, .dwg, .sat and .pdf files. For .STP files, you may need to right click on the download button and save the “target” or “link”. If you require a different format or cannot located the drawing you require, please contact us.
| Title | Summary | File Type | Link | hf:file_type |
|---|---|---|---|---|
| A6009gk.stp | Lead screw, graduated knob,, 3″ Travel | stp | stp | |
| A6012gk.stp | Lead screw, graduated knob, 6″ Travel | stp | stp | |
| A6015gk.stp | Lead screw, graduated knob, 9″ Travel | stp | stp | |
| A6018gk.stp | Lead screw, graduated knob, 12″ Travel | stp | stp | |
| A6021gk.stp | Lead screw, graduated knob, 15″ Travel | stp | stp | |
| A6024gk.stp | Lead screw, graduated knob, 18″ Travel | stp | stp | |
| Manual UniSlide® Dimensional Drawings | Dimensional drawings for the 5 Series of Manually Operated UniSlide® Linear Stages | |||
| UniSlide Manual Spec Overview | Overview of Manual UniSlide® Assemblies | |||
| UniSlide® Users Manual | Operating and Service Manual for UniSlide® Stages |
Knowledge Base
| Motion | Linear |
|---|---|
| Maximum Travel | 80" (203.2 cm) |
| Minimum Travel | 5" (12.7 cm) |
