UniSlide® Vacuum Modifications
Stages for use in vacuum environments can be customized with special materials, coatings, and seals to ensure compatibility with low-pressure conditions and minimize outgassing
Lead Times
Standard part numbers ship within 2 weeks of order. Parts requiring custom anodizing or modifications generally have a 4-week lead time. Rush orders may be available upon request. For lead time questions or special requirements, please contact an Application Engineer.
Velmex UniSlide® Products in Vacuum Environments
Basic low-level vacuum prep would entail degreasing, addition of blind holes and using a vacuum-compatible grease. Higher-level vacuum preparation could involve the basic prep, plus possible material substitutions and other modifications to the stage.
Please talk to a Velmex Application Engineer, if you have a vacuum or other special environment application. To create vacuum-capable or special application Velmex UniSlide®, BiSlide® or XSlide™ Assemblies, we need to know the vacuum TORR rating, your outgassing tolerance and the environment that the slide will be subjected to.
| UniSlide® Assembly Material Substitutions and Modifications | ||||
|---|---|---|---|---|
| Component | UniSlide Series | Standard Material | Substitute Material | Modification, if any |
Drive nut | All UniSlide Series | Delrin® |
| Substitute |
Bearing pads | A40, A60 Series | Rulon PTFE bonded with adhesive | UHMW or Vespel® | Secured with screws, not adhesive. |
Bearing pads | All UniSlide Series | Rulon 123 bonded with adhesive | Rulon bonded with epoxy (A15-A25 Series) or screw on pads (A40 - B90 Series) | Use 3M 2290 Epoxy. GSFC3495 |
Lubrication on lead screw and ways | All UniSlide Series | Bl-2 (Silcone lubricant) | Vacuum compatible lubricant | Omit existing. Substitute your lube. |
Blind Holes | All UniSlide Series | Standard fasteners |
| Add bleeder holes. Use vented screws. |
Knob | A15, MA15, A25 Series | Plastic/rubber | Aluminum knob | Vent aluminum knob |
Knob | All other UniSlide Series | Aluminum |
| Vent aluminum knob |
Engraved Knob | Graduated knob models | Wax filler in engraved lines and numbers |
| Omit |
Scales | Graduated knob and Scale and Vernier models | Normally attached with adhesive | Fasten with screws | Omit adhesive |
Limit switches | All UniSlide Series | PVC insulated wire, plastic cable clamps, glue, plastic switch | Check with Application Engineer on potential substitutions | Omit |
Thrust bearings | A15, MA15 Series and some A25 versions | Delrin® | None | Use A25 Series with SS Ball bearing |
Thrust bearings | All except A15, MA15 Series and some A25 versions | Pre-greased radial, steel ball bearing |
| Degrease radial ball bearings |
Surface finish | All UniSlide Series | None (Standard aluminum finish) | Electroless Nickel or Black Anodized | None |
Motor | All Motor-driven UniSlide Series | Standard motors offered | Vacuum compatible motors. (Purchase by customer) | None |
