Document Library

UniSlide® Assemblies – Lithograph Scale Adhesive

Instructions – Replace either the manual knob or motor on a Series A/B 5990 Rotary Table

PLEASE NOTE: This product no longer supported,

PLEASE NOTE: This product no longer supported.

PLEASE NOTE: This product no longer supported.

Adapter Plate – XY – A1500XY

Adapter Plate – XZ – A1500XZ

Free slide, 1.5 ” Travel

Rapid Advance, 1.5″ Travel

Rapid Advance with scale and vernier, Lead screw, 1.5″ Travel

Lead screw, graduated knob, 1.5″ Travel

Rapid Advance with micrometer, Lead screw, 1.5″ Travel

Lead screw with scale and vernier, 1.5″ Travel

Lead screw, basic knob, 1.5″ Travel, thumb lock

Lead screw, basic knob, 1.5″ Travel

Free slide, 4.5 ” Travel

Rapid Advance, 4.5″ Travel

Rapid Advance with scale and vernier, Lead screw, 4.5″ Travel

Lead Screw, graduated knob, 4.5″ Travel

Rapid Advance with micrometer, Lead screw, 4.5″ Travel

Lead Screw with scale and vernier, 4.5″ Travel

Lead screw, left/ right, Carriage separation 3″

Lead screw, basic knob, 4.5″ Travel

Free slide, 7.5 ” Travel

Rapid Advance, 7.5″ Travel

Rapid Advance with scale and vernier, Lead screw, 7.5″ Travel

Lead Screw, graduated knob, 7.5″ Travel

Rapid Advance with micrometer, Lead screw, 7.5″ Travel

Lead Screw with scale and vernier, 7.5″ Travel

Lead screw, Carriage separation 6″

Lead screw, basic knob, 7.5″ Travel

Free slide, 10.5 ” Travel

Rapid Advance, 10.5″ Travel

Rapid Advance with scale and vernier, Lead screw, 10.5″ Travel

Lead Screw, graduated knob, 10.5″ Travel

Rapid Advance with micrometer, Lead screw, 10.5″ Travel

Lead Screw with scale and vernier, 10.5″ Travel

Lead screw, left / right model with dual carriages, Carriage separation 9″

Lead screw, basic knob, 10.5″ Travel

Free slide, 13.5 ” Travel

Rapid Advance, 13.5″ Travel

Rapid Advance with scale and vernier, Lead screw, 13.5″ Travel

Lead Screw, graduated knob, 13.5″ Travel

Rapid Advance with micrometer, Lead screw, 13.5″ Travel

Lead Screw with scale and vernier, 13.5″ Travel

Lead screw, basic knob, left / right model with dual carriages, Carriage separation 12″

Lead screw, basic knob, 13.5″ Travel

Free slide, 16.5 ” Travel

Rapid Advance, 16.5″ Travel

Rapid Advance with scale and vernier, Lead screw, 16.5″ Travel

Lead screw, graduated knob, 16.5″ Travel

Rapid Advance with micrometer, Lead screw, 16.5″ Travel

Lead screw with scale and vernier, 16.5″ Travel

Lead screw, basic knob, left / right model with dual carriages, Carriage separation 15″

Lead screw, basic knob, 16.5″ Travel

Free slide, 19.5 ” Travel

Lead screw, basic knob, 19.5″ Travel

Free slide, 22.5 ” Travel

Free slide, 25.5 ” Travel

Lead screw, basic knob, 24.5″ Travel

Adapter Plate – XY – A2500XY

Adapter Plate – XZ – A2500XZ

Adapter Bracket – XZ – A2501XZ – for 9″ or under

Free Slide, 1.5″ Travel

Rapid Advance – limited adj., 1.5″ Travel

Rapid Advance – limited adj. with scale and vernier, 1.5″ Travel

Rapid Advance – limited adj. with micrometer, 1.5″ Travel

Rapid Advance – unlimited adj. with scale and vernier, 1.5″ Travel

Rapid Advance – unlimited adj., 1.5″ Travel

Lead screw. with scale and vernier, 1.5″ Travel

Lead screw, basic knob and crank, 1.5″ Travel

Lead screw, basic knob and crank, small knob, with thumb lock, 1.5″ Travel

Lead screw, graduated knob, 1.5″ Travel

A25 3.15″ Diameter Turntable – 3D CAD

Free Slide, 3.5″ Travel

Rapid Advance – limited adj., 3.5″ Travel

Rapid Advance – limited adj. with scale and vernier, 3.5″ Travel with left mounted slider lock

Rapid Advance – limited adj. with scale and vernier, 3.5″ Travel

Rapid Advance – limited adj. with micrometer, 3.5″ Travel

Rapid Advance – unlimited adj. with scale and vernier, 3.5″ Travel

Rapid Advance – unlimited adj., 3.5″ Travel

Lead screw,basic knob, left / right dual carriages, 1″ Carriage separation

Lead screw. with scale and vernier, 3.5″ Travel

Lead screw, basic knob and crank, 3.5″ Travel

Lead screw,graduated knob and crank, 3.5″ Travel, with rev counter

Lead screw, graduated knob and crank, 3.5″ Travel, with thumb lock

Lead screw, graduated knob, 3.5″ Travel

Free Slide, 6.5″ Travel

Rapid Advance – limited adj., 6.5″ Travel

Rapid Advance – limited adj. with scale and vernier, 6.5″ Travel

Rapid Advance – limited adj. with micrometer, 6.5″ Travel

Rapid Advance – unlimited adj. with scale and vernier, 6.5″ Travel

Rapid Advance – unlimited adj., 6.5″ Travel

Lead screw, basic knob, left / right dual carriages, 4″ carriage separation

Lead Screw with scale and vernier, 6.5″ Travel

Lead screw, basic knob and crank, 6.5″ Travel

Lead screw, graduate knob, 6.5″ Travel

Free Slide, 9.5″ Travel

Rapid Advance – limited adj., 9.5″ Travel

Rapid Advance – limited adj. with scale and vernier, 9.5″ Travel

Rapid Advance – limited adj. with micrometer, 9.5″ Travel

Rapid Advance – unlimited adj. with scale and vernier, 9.5″ Travel

Rapid Advance – unlimited adj., 9.5″ Travel

Lead screw, basic knob, left / right dual carriages, 7″ carriage separation

Lead Screw. with scale and vernier, 9.5″ Travel

Lead screw, basic knob and crank, 9.5″ Travel

Lead screw, graduate knob, 9.5″ Travel

Free Slide, 12.5″ Travel

Rapid Advance – limited adj., 12.5″ Travel

Rapid Advance – limited adj. with scale and vernier, 12.5″ Travel

Rapid Advance – limited adj. with micrometer, 12.5″ Travel

Rapid Advance – unlimited adj. with scale and vernier, 12.5″ Travel

Rapid Advance – unlimited adj., 12.5″ Travel

Lead screw, basic knob, left / right dual carriages, 10″ carriage separation

Lead Screw with scale and vernier, 12.5″ Travel

Lead screw, basic knob and crank, 12.5″ Travel

Lead screw, graduate knob, 12.5″ Travel

Rapid Advance – unlimited adj. with scale and vernier, 15.5″ Travel

Free Slide, 15.5″ Travel

Rapid Advance – limited adj., 15.5″ Travel

Rapid Advance – limited adj. with scale and vernier, 15.5″ Travel

Rapid Advance – limited adj. with micrometer, 15.5″ Travel

Rapid Advance – unlimited adj., 15.5″ Travel

Lead screw, basic knob, left / right dual carriages, 13 ” carriage separation

Lead screw, basic knob and crank, 15.5″ Travel

Lead screw, graduate knob, 15.5″ Travel

Free Slide, 18.5″ Travel

Lead screw, basic knob and crank, 18.5″ Travel

Free Slide, 21.5″ Travel

Lead screw, graduate knob, 21.5″ Travel

Free Slide, 24.5″ Travel

Lead screw, basic knob and crank, 24.5″ Travel

Free Slide, 27.5″ Travel

Elevating Table, basic knob, 3.25″ Travel

Elevating Table, basic knobs, 3.25″ Travel

Elevating Table A3901 and A3903, 1″ and 3.25″ Travel, respectively

Adapter Plate – XY – A4000XY

Adapter Plate – XZ – A4000XZ

Free Slide, 8″ Travel

Adapter Bracket – XZ – A4001XZ – for 9″ or under

Free Slide, 2″ Travel

Rapid Advance – limited adj., 2″ Travel

Rapid Advance – limited adj. with scale and vernier, 2″ Travel

Rapid Advance – limited adj. with micrometer, 2″ Travel

Rapid Advance – unlimited adj. with scale and vernier, 2″ Travel

Rapid Advance – unlimited adj., 2″ Travel

Lead screw, basic knob and crank, 2″ Travel, thumb lock

Lead screw, basic knob and crank, 2″ Travel

Lead screw, graduated knob, 2″ Travel

Lead screw with scale and vernier, 2″ Travel

A40 4.13″ Diameter Turntable – 3D CAD

Free Slide, 5″ Travel

Rapid Advance – limited adj., 5″ Travel

Rapid Advance – limited adj. with scale and vernier, 5″ Travel

Rapid Advance – limited adj. with micrometer, 5″ Travel

Rapid Advance – unlimited adj. with scale and vernier, 5″ Travel

Rapid Advance – unlimited adj., 5″ Travel

Lead screw, basic knob, left / right model with dual carriages, Carriage separation 1″

Lead screw, basic knob and crank, 5″ Travel, thumb lock

Lead screw, basic knob and crank, 5″ Travel

Lead screw, graduated knob, 5″ Travel

Lead screw with scale and vernier, 5″ Travel

Rapid Advance – limited adj., 8″ Travel

Rapid Advance – limited adj. with scale and vernier, 8″ Travel

Rapid Advance – limited adj. with micrometer, 8″ Travel

Rapid Advance – unlimited adj. with scale and vernier, 8″ Travel

Rapid Advance – unlimited adj., 8″ Travel

Lead screw, basic knob and crank, dual carriages, 4″ Carriage separation

Lead screw, basic knob and crank, 8″ Travel

Lead screw, graduated knob, 8″ Travel

Lead screw with scale and vernier, 8″ Travel

Free Slide, 11″ Travel

Rapid Advance – limited adj., 11″ Travel

Rapid Advance – limited adj. with scale and vernier, 11″ Travel

Rapid Advance – limited adj. with micrometer, 11″ Travel

Rapid Advance – unlimited adj. with scale and vernier, 11″ Travel

Rapid Advance – unlimited adj., 11″ Travel

Lead screw, basic knob and crank, dual carriages, 7 ” Carriage separation

Lead screw, basic knob and crank, 11″ Travel

Lead screw, graduated knob, 11″ Travel

Lead screw with scale and vernier, 11″ Travel

Free Slide, 14″ Travel

Rapid Advance – unlimited adj., 14″ Travel

Lead screw, basic knob and crank, left/right screw, dual carriages, 10″ carriage separation

Lead screw, basic knob and crank, 14″ Travel

Lead screw, graduated knob, 14″ Travel

Lead screw with scale and venier,, 14″ Travel

Free Slide, 17″ Travel

Rapid Advance – unlimited adj., 17″ Travel

Lead screw, basic knob and crank, left/right screw, dual carriages, 13″ Carriage separation

Lead screw, basic knob and crank, 17″ Travel

Lead screw, graduated knob, 17″ Travel

Free Slide, 20″ Travel

Rapid Advance – unlimited adj., 20″ Travel

Lead screw, basic knob and crank, left/right screw, dual carriages, 16″ Carriage separation

Lead screw, basic knob and crank, 20″ Travel

Lead screw, graduated knob, 20″ Travel

Free Slide, 23″ Travel

Lead screw, basic knob and crank, 23″ Travel

Lead screw, graduated knob, 23″ Travel

Free Slide, 26″ Travel

Lead screw, basic knob and crank, 26″ Travel

Lead screw, graduated knob, 26″ Travel

Free Slide, 29″ Travel

Lead screw, basic knob and crank, 29″ Travel

Free Slide, 32″ Travel

Lead screw, basic knob and crank, 32″ Travel

Free Slide, 35″ Travel

Lead screw, basic knob and crank, 35″ Travel

A48 Series Manual Rotary Table – 5″ dia. – 3D CAD

A5990 Manual Rotary Table – 1.65″ dia. – 2D with dimensions

A5990 Manual Rotary Table – 1.65″ dia. – 3D CAD

Adapter Plate – to mount an A48 Series Rotary Table to an A40 or A60 Series UniSlide

Adapter Plate – XY – A6000XY

Adapter Plate – XZ – A6000XZ

Adapter Bracket – XZ – A6001XZ – for 12″ or under

Free Slide, 3″ Travel

Lead screw, graduated knob,, 3″ Travel

Rapid Advance, lead screw, 3″ Travel

Rapid Advance, lead screw with scale and venier, 3″ Travel

Lead screw with scale and venier, 3″ Travel,

Lead screw, knob and crank, 3″ Travel, with slider lock and rev. counter

Lead screw, knob and crank, 3″ Travel, with thumb lock

Lead screw, basic knob and crank, 3″ Travel

Rapid Advance, lead screw with scale and venier, 6″ Travel

Free Slide, 6″ Travel

Lead screw, graduated knob, 6″ Travel

Rapid Advance, lead screw, 6″ Travel

Lead screw with scale and venier, 6″ Travel,

Lead screw, knob and crank, 6″ Travel with thumb lock

Lead screw, basic knob and crank, 6″ Travel with 6″ slider

Free Slide, 9″ Travel

Lead screw, graduated knob, 9″ Travel

Rapid Advance, lead screw, 9″ Travel

Rapid Advance, lead screw with scale and venier, 9″ Travel

Lead screw with scale and venier, 9″ Travel,

Lead screw, basic knob and crank, 9″ Travel

Free Slide, 12″ Travel

Lead screw, graduated knob, 12″ Travel

Rapid Advance, lead screw, 12″ Travel

Rapid Advance, lead screw with scale and venier, 12″ Travel

Lead screw with scale and venier, 12″ Travel,

Lead screw, basic knob and crank, 12″ Travel

Free Slide, 15″ Travel

Lead screw, graduated knob, 15″ Travel

Rapid Advance, lead screw, 15″ Travel

Lead screw with scale and venier, 15″ Travel,

Lead screw, basic knob and crank, 15″ Travel

Free Slide, 18″ Travel

Lead screw, graduated knob, 18″ Travel

Rapid Advance, lead screw, 18″ Travel

Lead screw, basic knob and crank, 18″ Travel

Free Slide, 21″ Travel

Rapid Advance, lead screw, 21″ Travel

Lead screw, basic knob and crank, 21″ Travel

Free Slide, 24″ Travel

Rapid Advance, lead screw, 24″ Travel

Lead screw, basic knob and crank, 24″ Travel

Free Slide, 27″ Travel

Rapid Advance, lead screw, 27″ Travel

Lead screw, basic knob and crank, 27″ Travel

Free Slide, 30″ Travel

Rapid Advance, lead screw, 30″ Travel

Free Slide, 33″ Travel

Free Slide, 36″ Travel

Free Slide, 39″ Travel

Free Slide, 42″ Travel

PLEASE NOTE: This product no longer supported.

Installation instructions for AMO LMK Inductive Encoder

Gearbox – A60 or B90 Series – Up or down orientation

Spec Sheet for HEDS/HEDM Optical Rotary Encoder

Small XY Table, no aperature, 0.100″ per revolution, 2″ X 2″ Travel

Small XY Table, no aperature, 0.100″ per revolution, 2″ X 2″ Travel

Small XY Table, no aperature, 0.100″ per revolution, 3″ X 3″ Travel

Small XY Table, no aperature, 0.100″ per revolution, 3″ X 3″ Travel

Small XY Table, no aperature, 0.100″ per revolution, 4″ X 4″ Travel

Small XY Table, no aperature, 0.100″ per revolution, 4″ X 4″ Travel

Medium XY Table, no aperature, 0.100″ per revolution, 2″ X 2″ Travel

Medium XY Table, 0.100″ per revolution, 2″ X 2″ Travel

Drawing for the Thumblocks on an XY Table – Series AXY4006

Drawing for the Thumblocks on an XY Table – Series AXY4006

Medium XY Table, 2″ X 2″ Travel – generic file for alternate lead screws

Medium XY Table, 0.100″ per revolution, 5″ X 5″ Travel

Medium XY Table, 0.100″ per revolution, 5″ X 5″ Travel

Large XY Table, 0.100″ per revolution, 3″ X 3″ Travel

Large XY Table, 0.100″ per revolution, 3″ X 3″ Travel

Large XY Table, 0.100″ per revolution, 6″ X 6″ Travel

Large XY Table, 0.100″ per revolution, 6″ X 6″ Travel

Large XY Table, 0.100″ per revolution, 9″ X 9″ Travel

Large XY Table, 0.100″ per revolution, 9″ X 9″ Travel

Adapter Bracket – XZ – B2503XZ – for over 9″

Elevating Table, basic knob, 1.5″ Travel

Elevating Table, basic knob with thumbscrew lock, 3.5″ Travel

Elevating Table, basic knob, 3.5″ Travel

Elevating Table, basic knob, 6.5″ Travel

Adapter Bracket – XZ – B4003XZ – for 12″ to 15″

Adapter Bracket – XZ – B4004XZ – for over 15″

B48 Series Rotary Table – 5″ dia.- motorized – 3D CAD

B48 Series Rotary Table – 5″ dia.- motorized – 3D CAD

B4909W1 Elevating Table 3D STEP Model

Elevating Table, basic knob, 8″ Travel

B5990 Rotary Table – 1.65″ dia. – motororized – 3D CAD

Adapter Plate – to mount a B5990TS Rotary Table to any A Series UniSlide

Adapter Bracket – XZ – B6003XZ – for 12″ to 15″

Adapter Bracket – XZ – B6004XZ – for over 15″

Elevating Table, no knob, 3″ Travel

Elevating Table, basic knob, 6″ Travel

Elevating Table, no knob, 6″ Travel

Adapter Plate – XY – B9000XY

Adapter Plate – XZ – B9000XZ

Adapter Bracket – XZ – B9001XZ – for 18″ or under

Adapter Bracket – XZ – B9002XZ – for 21″ to 24″

Adapter Bracket – XZ – B9003XZ – for over 24″

Free Slide, 3″ Travel

Lead screw, basic knob and crank, 3″ Travel

Lead screw, graduated knob, 3″ Travel

Free Slide, 6″ Travel

Lead screw, basic knob and crank, 6″ Travel

Lead screw, graduated knob, 6″ Travel

Free Slide, 9″ Travel

Lead screw, basic knob and crank, 9″ Travel

Lead screw, graduated knob, 9″ Travel

Free Slide, 12″ Travel

Lead screw, basic knob and crank, 12″ Travel

Lead screw, graduated knob, 12″ Travel

Free Slide, 15″ Travel

Lead screw, basic knob and crank, 15″ Travel

Lead screw, graduated knob, 15″ Travel

Free Slide, 18″ Travel

Lead screw, basic knob and crank, 18″ Travel

Lead screw, graduated knob, 18″ Travel

Free Slide, 21″ Travel

Lead screw, basic knob and crank, 21″ Travel

Free Slide, 24″ Travel

Lead screw, basic knob and crank, 24″ Travel

Free Slide, 27″ Travel

Lead screw, basic knob and crank, 27″ Travel

Free Slide, 30″ Travel

Lead screw, basic knob and crank, 30″ Travel

Free Slide, 33″ Travel

Lead screw, basic knob and crank, 33″ Travel

Free Slide, 36″ Travel

Lead screw, basic knob and crank, 36″ Travel

Free Slide, 39″ Travel

Lead screw, basic knob and crank, 39″ Travel

Specifications for BEI MX21 Optical Rotary Encoder

Dimensional drawings for the Belt-Drive BiSlide®

Instructions for attaching a Magnetic Encoder to a BiSlide Assembly

Instructions – Assembly of F2 base

Instructions – Assembly of F4 base

Instructions – Procedure to assemble the bearing and re-establish the preload in the field.

Instructions – Assembly of the Parallel-Coupled Belt-Drive (motor-driven) BiSlide System

Motorized, Parallel-Coupled, Belt-Driven BiSlide with ±100″ Travel, set 120″ center to center, with 2 supports to the frame

Motorized, Parallel-Coupled, Belt-Driven BiSlide with ±100″ Travel, set 120″ center to center, with 2 supports to the frame

Overview of BiSlide® Assembles – manual and motorized

BiSlide – MC-1 Cleat

BiSlide – MC-2 Cleat

Instructions – Number and position of cleats recommended for BiSlide Assemblies

2D Dimensional Drawings

Chart showing the lead screw torque/load for motorized BiSlides

BiSlide – MC-3 Cleat for Optical Table Mounting

Motorized, Parallel-Coupled BiSlide with 25″ Travel, set 33″ center to center, with 2 supports to the frame

Motorized, Parallel-Coupled BiSlide with 25″ Travel, set 33″ center to center, with 2 supports to the frame

Motorized, Parallel-Coupled BiSlide with 30″ Travel, set 33″ center to center, with 2 supports to the frame

Motorized, Parallel-Coupled BiSlide with 30″ Travel, set 33″ center to center, with 2 supports to the frame

Instructions – Assembly of the Parallel-Coupled BiSlide System – PC4

BiSlide® Side Knob System

LegacyUser’s Operating Manual for BiSlide Assemblies built before March 2019 with StabliNut I™ drive nut.

Current User’s Operating Manual for BiSlide Assemblies built after March 2019 with StabiNut II™ drive nut

Instruction – Installing Way Covers on the linear BiSlide

Side Knob BiSlide, Lead screw, 30″ VerticalTravel – knob left / lock right

Overview with specifications of the Belt-Drive Assembly

Tech Chart -: Various calculations for determining speed, steps and direction using step motors and the VXM Controller

Computer Optimized Stepper Motor Operating System without the installer v.3.1.6

ELGO EMIX23 encoder data sheet

Operation Manual for ELGO EMIX23 Magnetic Encoders

Specifications for ELGO Magnetic Encoders

Instructions – Wiring diagrams for Encoder cable connection to VRO Readout

Specifications for the encoders offered by Velmex

Specifications for EPC Rotary Encoders mounted on double shaft motors

Short XZ Gusset Inline

Short XZ Gusset – Inline Side Mount

Tall XZ Gusset – Inline

Tall XZ Gusset – Inline Side Mount

Multi-purpose adapter plate (4.6″ c 4.6″ X 0.375″)

Adapter plate to mount Rotary Table (A48 or B48 Series) to BiSlide

Adapter plate to mount Rotary Table (A59 or B59 Series) to BiSlide

Adapter plate to end mount BiSlide extrusion.

Adapter plate to end mount BiSlideto an optical bench

BiSlide payload plate to expand the carriage (8″ x 8″ x 0.375″)

Adjustable foot for BiSlide bases and post assemblies.

Tech Chart:- Increments that can be moved using various Velmex linear stages, the VXM Controller and step motors

Installation instructions for AMO Inductive Encoder

Examples of VXC Commands for LabVIEW

Examples of VXC Commands for LabVIEW

Gearbox – A60 or B90 Series – Up or down orientation

Gearbox – A60 or B90 Series – Up or down orientation

Gearbox – A60 or B90 Series – Up or down orientation

Tech Chart:-Steps, Distance and Speed translation information for Velmex lead screws

Overview of Limit Switches available for Velmex stages

BiSlide® and XSlide™ Assemblies – Bearing Pad Adhesive

Series MA15, 1.5″ travel, NEMA 17 Stepper Motor

Series MA15, 1.5″ travel,

Series MA15, 1.5″ travel,

Series MA15, 4.5″ travel,

Series MA15, 4.5″ travel,

Series MA15, 7.5″ travel,

Series MA15, 7.5″ travel,

Series MA15, 10.5″ travel,

Series MA15, 10.5″ travel,

Series MA25, 0.5″ travel

Series MA25, 0.5″ travel

Series MA25, 2.5″ travel

Series MA25, 2.5″ travel

Series MA25, 5.5″ travel

Series MA25, 5.5″ travel

Series MA25, 5.5″ travel, left / right lead screw

Series MA25, 8.5″ travel

Series MA25, 8.5″ travel

Series MA25, 8.5″ travel, NEMA 23 Stepper Motor

Series MA25, 8.5″ travel

Series MA25, 11.5″ travel

Series MA25, 11.5″ travel

Series MA25, 14.5″ travel

Series MA25, 14.5″ travel

Series MA25, 17.5″ travel

Series MA25, 17.5″ travel

Series MA25, 17.5″ travel, Nema 23 Stepper Motor

Series MA25, 17.5″ travel

Series MA25, 20.5″ travel

Series MA25, 20.5″ travel

Series MA25, 23.5″ travel

Series MA25, 23.5″ travel

Series MA40, 1″ travel,

Series MA40, 1″ travel,

Series MA40, 4″ travel,

Series MA40, 4″ travel,

Series MA40, 7″ travel

Series MA40, 7″ travel

Series MA40, 10″ travel,

Series MA40, 10″ travel, NEMA 23 Stepper Motor

Series MA40, 10″ travel, 4″ carriage

Series MA40, 13″ travel,

Series MA40, 13″ travel,

Series MA40, 16″ travel

Series MA40, 16″ travel

Series MA40, 19″ travel,

Series MA40, 19″ travel,

Series MA40, 19″ travel, with optional 6″ carriage, NEMA 23 Stepper Motor

Series MA40, 22″ travel,

Series MA40, 22″ travel,

Series MA40, 25″ travel,

Series MA40, 25″ travel, NEMA 23 Stepper Motor

Series MA40, 25″ travel,

Series MA40, 28″ travel,

Series MA40, 28″ travel,

Series MA40, 31″ travel,

Series MA40,31″ travel,

Series MA40, 34″ travel,

Series MA40, 34″ travel,

Series MA40, 37″ travel,

Series MA40, 37″ travel,

Series MA40, 40″ travel,

Series MA40, 40″ travel,

Series MA60, 8″ travel,

Dimensional drawings for the 5 Series of Manually Operated UniSlide® Linear Stages

MAXY4006 table, Travel 2 x 2

MAXY4006 table, Travel 2 x 2

MAXY4006 table, Travel 5 x 5

MAXY4009 table, Travel 5 x 5

MAXY6009 table, Travel 3 x 3

MAXY6009 table, Travel 3 x 3

MAXY6012 table, Travel 6 x 6

MAXY6015 table, Travel 9 x 9

MAXY6015 table, Travel 9 x 9

Belt Drive, 10″ Travel, PK296 Stepper – 6 Cleats

Belt Drive, 10″ Travel, PK296 Stepper – 6 Cleats

Belt Drive, 20″ Travel – 6 Cleats

Belt Drive, 20″ Travel, PK296 Stepper – 6 Cleats

Belt Drive, 30″ Travel – 8 Cleats

Belt Drive, 30″ Travel, PK296 Stepper – 8 Cleats

Belt Drive, 40″ Travel – 10 Cleats

Belt Drive, 40″ Travel, PK296 Stepper – 10 Cleats

Belt Drive, 50″ Travel – 12 Cleats

Belt Drive, 50″ Travel, PK296 Stepper – 12 Cleats

Belt Drive, 60″ Travel – 14 Cleats

Belt Drive, 60″ Travel, PK296 Stepper – 14 Cleats

Belt Drive, 80″ Travel – 16 Cleats

Belt Drive, 80″ Travel, PK296 Stepper – 16 Cleats

Belt Drive, 100″ Travel – 18 Cleats

Belt Drive, 100″ Travel, PK296 Stepper – 18 Cleats

Belt Drive, 120″ Travel – 20 Cleats

Belt Drive, 120″ Travel, PK296 Stepper – 20 Cleats

Belt Drive, 140″ Travel – 22 Cleats

Belt Drive, 140″ Travel, PK296 Stepper – 22 Cleats

Belt Drive, 160″ Travel – 24 Cleats

Belt Drive, 160″ Travel, PK296 Stepper – 24 Cleats

Belt Drive, 180″ Travel – 26 Cleats

Belt Drive, 180″ Travel, PK296 Stepper – 26 Cleats

Belt Drive, 200″ Travel – 28 Cleats

Belt Drive, 200″ Travel, PK296 Stepper – 28 Cleats

Belt Drive, 220″ Travel – 30 Cleats

Belt Drive, 220″ Travel, PK296 Stepper -30 Cleats

Series MB90, 3″ travel

Series MB90, 3″ travel

Series MB90, 6″ travel

Series MB90, 6″ travel

Series MB90, 9″ travel

Series MB90, 9″ travel

Series MB90, 12″ travel

Series MB90, 12″ travel

Series MB90, 15″ travel

Series MB90, 15″ travel

Series MB90, 18″ travel

Series MB90, 18″ travel

Series MB90, 21″ travel

Series MB90, 21″ travel

Series MB90, 24″ travel

Series MB90, 24″ travel

Series MB90, 27″ travel

Series MB90, 27″ travel

Series MB90, 30″ travel

Series MB90, 30″ travel

Series MB90, 33″ travel

Series MB90, 33″ travel

Series MB90, 36″ travel

Series MB90, 36″ travel

Free Sliding BiSlide, 5″ Travel

Free Sliding BiSlide, 10″ Travel

Free Sliding BiSlide, 15″ Travel

Free Sliding BiSlide, 20″ Travel

Free Sliding BiSlide, 30″ Travel

Free Sliding BiSlide, 40″ Travel

Free Sliding BiSlide, 50″ Travel

Free Sliding BiSlide, 60″ Travel

Free Sliding BiSlide, 80″ Travel

Tandem BiSlide MN10 with MF Free Slide, 5″, 10″ 15″ 20″, 30″ Travel Lengths

Tandem BiSlide MN10 with MF Free Slide, 5″, 10″ 15″ 20″, 30″ Travel Lengths

XZ Configuration – Lead screw, basic knob, 5″ Travel,

Lead screw, basic knob, 5″ Travel

Lead screw, 5″ Travel, PK266 stepper – 2 Cleats

Lead screw, 5″ Travel, PK266 stepper – 4 Cleats

Lead screw, 5″ Travel, PK266 stepper

Lead screw, 5″ Travel, Nema 34 stepper

Side Knob BiSlide, Lead screw, 5″ Vertical Travel, – lock left,/knob right

Lead screw, basic knob, 10″ Travel – 6 cleats

Lead screw, basic knob, 10″ Travel, left-right screw motion

Lead screw, basic knob, 10″ Travel

Lead screw,10″ Travel, PK266 stepper – 2 Cleats

Lead screw,10″ Travel, PK266 stepper – 4 Cleats

Lead screw,10″ Travel, PK266 stepper – 6 Cleats

Lead screw,10″ Travel, PK266 stepper

Lead screw, 10″ Travel, Nema 34 stepper

Side Knob BiSlide, Lead screw, 10″ VerticalTravel – lock left / knob right

Lead screw, basic knob, 15″ Travel – 4 cleats

Lead screw, basic knob, 15″ Travel – Counter – 8 cleats

Lead screw,15″ Travel, PK266 stepper – 2 Cleats

Lead screw,15″ Travel, PK266 stepper – 4 Cleats

Lead screw,15″ Travel, PK266 stepper – 8 Cleats

Lead screw,15″ Travel, PK266 stepper

Lead screw, 15″ Travel, Nema 34 stepper

Side Knob BiSlide, Lead screw, 15″ Vertical Travel, – lock left,/knob right

Side Knob BiSlide, Lead screw, 15″ VerticalTravel – lock left / knob right

Lead screw, basic knob, 20″ Travel – 6 cleats

Lead screw, 20″ Travel, PK266 stepper – 10 Cleats

Lead screw, 20″ Travel, PK266 stepper – 2 Cleats

Lead screw, 20″ Travel, PK266 stepper – 6 Cleats

Lead screw, 20″ Travel, PK266 stepper

Lead screw, 20″ Travel, Nema 34 stepper

Side Knob BiSlide, Lead screw,, 20″ VerticalTravel – knob left / knob right

Lead screw, basic knob, 30″ Travel – 12 cleats

Lead screw, 30″ Travel, PK266 stepper – 12 Cleats

Lead screw, 30″ Travel, PK266 stepper – 2 Cleats

Lead screw, 30″ Travel, PK266 stepper – 8 Cleats

Lead screw, 30″ Travel, PK266 stepper

Lead screw, 30″ Travel, Nema 34 stepper

Lead screw, basic knob, 40″ Travel – 10 cleats

Lead screw, 40″ Travel, PK296 stepper – 10 Cleats

Lead screw, 40″ Travel, PK296 stepper – 14 Cleats

Lead screw, 40″ Travel, PK296 stepper

Lead screw, basic knob, 50″ Travel – 12 cleats

Lead screw, 50″ Travel, PK296 stepper – 12 Cleats

Lead screw, 50″ Travel, PK296 stepper – 16 Cleats

Lead screw, 50″ Travel, PK296 stepper

Lead screw,basic knob, 60″ Travel – 14 Cleats

Lead screw, 60″ Travel, PK296 stepper – 14 Cleats

Lead screw, 60″ Travel, PK296 stepper – 18 Cleats

Lead screw, 60″ Travel, PK296 stepper

Lead screw, 80″ Travel, PK296 stepper – 16 Cleats

Lead screw, 80″ Travel, PK296 stepper – 20 Cleats

Lead screw, 80″ Travel, PK296 stepper

Tandem BiSlide MN10 with MF Free Slide, 40″, 50″ 60″ 80 Travel Lengths

Tandem BiSlide MN10 with MF Free Slide, 40″, 50″ 60″ 80 Travel Lengths

Diagram – Wiring for step motors installed on Velmex devices

Dimensional drawings for the 5 Series of Motorized UniSlide Linear Stages

Instructions – How to disassemble and mount an A15 Series UniSlide Assembly

Manual BiSlide Rapid Advance with 15″ of travel and 4 mounting cleats

Manual BiSlide Rapid Advance with 20″ of travel and 6 mounting cleats

Tandem BiSlide Plate to connect to dual carriages together.

Two Carriages in one slide body with mounting holes TANDEM

MSPP-10B Two-Carriages-in-one-slide-body-with-mounting-holes TANDEM

Tandem, Lead screw, BiSlide, 5″ Travel, PK296 Stepper- 4 Cleats

Tandem, Lead screw, BiSlide, 10″ Travel, PK296 Stepper- 6 Cleats

Tandem, Lead screw, BiSlide, 15″ Travel, PK296 Stepper- 8 Cleats

Tandem, Lead screw, BiSlide, 20″ Travel, PK296 Stepper- 10 Cleats

Tandem, Lead screw, BiSlide, 30″ Travel, PK296 Stepper- 12 Cleats

Tandem, Lead screw, BiSlide, 40″ Travel, PK296 Stepper- 14 Cleats

Tandem, Lead screw, BiSlide, 50″ Travel, PK296 Stepper- 16 Cleats

Tandem, Lead screw, BiSlide, 60″ Travel, PK296 Stepper- 18 Cleats

Tandem, Lead screw, BiSlide, 80″ Travel, PK296 Stepper- 20 Cleats

PLEASE NOTE: This product no longer supported.

PLEASE NOTE: This product no longer supported.

Instructions – Assembly of the Parallel-Coupled Lead Screw (motor-driven) BiSlide System – external motor – PC2

Dimensional drawings for the Parallel-Coupled BiSlide®

2-Phase motor with 18:1 gear, single shaft

2-Phase motor with18:1 gear, double shaft

2-Phase motor with round shaft – single shaft

2-Phase motor with round shaft – double shaft

2-Phase motor with round shaft – single shaft

2-Phase motor with round shaft – double shaft

High Resolution, 2-Phase motor with round shaft – single shaft

High Resolution, 2-Phase motor with round shaft – double shaft

2-Phase motor with round shaft – single shaft

2-Phase motor with round shaft – double shaft

High Resolution, 2-Phase motor with round shaft – single shaft

High Resolution, 2-Phase motor with round shaft – double shaft

2-Phase motor with round shaft – single shaft

2-Phase motor with round shaft – double shaft

2-Phase motor with round shaft – single shaft

2-Phase motor with round shaft – double shaft

2-Phase motor with 10:1 gear, double shaft

2-Phase motor with 18:1 gear, double shaft

2-Phase motor with 3.6:1 gear, double shaft

2-Phase motor with 36:1 gear, double shaft

2-Phase motor with 7.2:1 gear, double shaft

Metronics QC10-V / Heidenhain ND1001 PLEASE NOTE: This product no longer supported.

Metronics QC10-V / Heidenhain ND1001 PLEASE NOTE: This product no longer supported.

Metronics QC10-V / Heidenhain ND1001 PLEASE NOTE: This product no longer supported.  

PLEASE NOTE: This product no longer supported. Metronics Quadra-Chek (QC100 series) / Heidenhain ND1100

Metronics Quadra-Chek (QC100 series) / Heidenhain ND1100 PLEASE NOTE: This product no longer supported

Metronics Quadra-Chek (QC100 series) / Heidenhain ND1100 PLEASE NOTE: This product no longer supported.

Metronics QC1000 Series PLEASE NOTE: This product no longer supported.

Metronics QC1000 Series PLEASE NOTE: This product no longer supported.

Metronics QC1000 Series PLEASE NOTE: This product no longer supported.

Gearbox – A60 or B90 Series – Left or right orientation

Gearbox – A60 or B90 Series – Left or right orientation

Recommended Rotary Encoder for Velmex linear and rotary stages

Instructions – Installing and operating A2505T or A4007TS Turntable

Instructions – Installing and operating A4007T or A4007TS Turntable

Instructions – Adjusting backlash on B4800 Rotary Tables

Instructions – Attaching a motor to a B4800 Velmex Rotary Table

Overview of Velmex Rotary Tables – manual and motorized

Gearbox – A60 or B90 Series – Left or right orientation

Gearbox – A60 or B90 Series – Left or right orientation

Diagnostics for driver issues v.3.1.0

Diagnostics for Driver Issues (Version 3.1.0)

Dimensional drawings for the Side Knob BiSlide

Gearbox – A25 or A40 Series

Gearbox – A25 or A40 Series

Information on speed and linear distance at revolutions per minute and per second – measured using a Velmex VXM Motor Controller

Tree Ring Measuring System Overview

Instructions – Care and Use of your Velmex TA Measuring System

Overview of the layout of the components of a TA System

UniSlide Rapid Advance A40 24″ Travel, 6″ carriage, with encoder mounted

UniSlide Rapid Advance A40 24″ Travel, 6″ carriage, with encoder mounted

UniSlide Rapid Advance A40 24″ Travel, 6″ carriage, with encoder mounted

Chart showing the lead screw torque/load for motorized UniSlides and XSlides

Chart showing lead screw torque/load for motorized UniSlide® Assemblies

Overview of Manual UniSlide® Assemblies

Specifications, operation, care and maintenance of Linear UniSlide® Assembly

Operating and Service Manual for UniSlide® Stages

Web page with access to the cable drivers for various operating systems so that the application software can access the USB as a standard COM port.

BiSlide®/ XSlide™ / UniSlide® Assemblies – Velmex BL-2 Lubricant

Velmex Product Catalog

Product List including all Velmex Products

Specs and wiring for all CURRENT Velmex Stepper Motors for use with VXC Control

Dimensions of obsolete Oriental Motor Vexta PK series motors

3D CAD Model

3D CAD Model

3D CAD Model

3D CAD Model

3D CAD Model

3D CAD Model

3D CAD Model

PLEASE NOTE: This product no longer supported.

Documentation – VP9000 Users Manual

Instructions – Set-up VRO Readout

VRO Readout assembly CAD drawing

Specifications, operation, care and maintenance of VRO™ Readout

Overview and Specifications for VRO™ Readouts

Calculator for VRO Units for Rotary Encoders (inch/mm)

Calculator for VRO Units for Linear Encoders (inch/mm)

Calculator for VRO Units for Linear Encoders (mm/inch)

Calculator for VRO Units for Rotary Encoders (mm/inch)

STEP file of VXC 24V power supply

STEP file of VXC 28V power supply

Velmex App for configuration & testing of VXC controller Build 05.28.25

The optional auxiliary I/O breakout module is a convenient method to interface to a VXC

Overview of the VXC Stepping Motor Controller

Operating Manual: Specifications, features, function, programming details for the VXC Controller (Version 5.21 Rev 09-01-26)

Instructions: Set-up, connecting and configuring the VXC-1 with a Velmex stage

STEP file of VXC-1 assembly with 2 mounting cleats

STEP file of VXC-1 assembly with 4 mounting cleats

Instructions: Set-up, connecting and configuring the VXC-2 with a Velmex stage

STEP file of VXC-2 assembly with 2 mounting cleats

STEP file of VXC-2 assembly with 4 mounting cleats

STEP file of VXC-2 assembly with side mounting plates

Instructions: Set-up, connecting and configuring the VXC-3 with a Velmex stage

STEP file of VXC-3 assembly with 2 mounting cleats

STEP file of VXC-3 assembly with 4 mounting cleats

STEP file of VXC-3 assembly with side mounting plates

Instructions: Set-up, connecting and configuring the VXC-4 with a Velmex stage

STEP file of VXC-4 assembly with 2 mounting cleats

STEP file of VXC-4 assembly with side mounting plates

Instructions – Set-up VXM Controller

Information on speed and linear distance at revolutions per minute and per second – measured using a Velmex VXM™ Motor Controller

Specifications, operation, care and maintenance of VXM™ Controller

Instructions – Assembly VXM Rack Mount

Specifications, operation, care and maintenance of VXM-1J Controller

Gusset – 12″ for a vertical mount

Gusset – 18″ for a vertical mount

Gusset – 2.5″ for a vertical mount

Gusset – 6″ for a vertical mount

Standard Cleat mounts the XSlide to a base/surface. It also mounts to another XSlide payload carriage to create XY configurations.

Standard Cleat mounts the XSlide to a base/surface. It also mounts to another XSlide payload carriage to create XY configurations.

Optical Cleat used to mount an XSlide to an optical table.

Lead screw, basic knob, 2″ Travel

Lead screw, NEMA 17, 2″ Travel

Lead screw, basic knob, 4″ Travel

Lead screw, NEMA 23, 4″ Travel, 4 cleats

Lead screw, NEMA 17, 4″ Travel – 2 cleats

Lead screw, NEMA 17, 4″ Travel – 4 cleats

Lead screw, NEMA 17, 4″ Travel

Lead screw, basic knob, 6″ Travel

Lead screw, NEMA 17, 6″ Travel – 4 cleats

Lead screw, basic knob, 8″ Travel

Lead screw, NEMA 23, 8″ Travel – 4 cleats

Lead screw, NEMA 17, 8″ Travel – 6 cleats

Lead screw, NEMA 17, 12″ Travel – 6 cleats

Lead screw, basic knob, 18″ Travel

Lead screw, NEMA 17, 18″ Travel – 6 cleats

Lead screw, basic knob, 24″ Travel

Lead screw, NEMA 17, 24″ Travel – 8 cleats

Lead screw, NEMA 17, 30″ Travel -10 cleats

Adapter plate that connects an XSlide to a BiSlide.

Adapter plate that connects XSlide to a Velmex Rotary Table.

Spacers for Payload Adapter Plate

8″ x 8″ XSlide Top Plate with Standoffs

4″x4″ XSlide Top Plate with Standoffs

4×4 Top Plate with Standoffs and 1/4-20 optical grid mounting hole pattern